doc/install_on_raspberry.md

Install YunoHost on a Raspberry Pi

Find other ways to install YunoHost here.

Pre-requisite

• A Raspberry Pi model B -- Model A should work, but remains untested

• An SD card: 4GB capacity (or more) and class10 speed rate are highly recommended

• Another computer to read this guide and access to your Raspberry Pi

• A screen and a keyboard are recommended to control your Raspberry Pi if a problem occurs.

• A reasonable ISP, preferably with a good and unlimited upstream bandwidth

• The YunoHost Raspberry image, available here:

  http://build.yunohost.org/raspberry-pi-test.img.tar.gz

---

Installation steps

1. Copy image to the SD card

2. Plug & boot

3. Post-install

---

If you need help during one of these steps, do not hesitate to use our support tools.